A Hydraulic Swing Beam Shears. Automatic setting of the cutters rake and the gap basing on the tables and programmed values. Depending on a model cutting S235 steel even 6 meters and of 0.5 – 40 mm thickness. A simple control system, rich standard equipment, reliability and the quality of the workmanship make that the shear is a very interesting product on the Polish market. Quick change of the gap between blades is performed on the machine side. It enables operation in the full range of the given material thicknesses. The machine is equipped with high quality hydraulics, electrics and control systems.
- Programamble stop of up to 1000 range.
- Cutting length from 2000 to 6000 mm.
- Maximal thickness 4 – 20 mm (depending on model).
- Automatic control of cutter rake and gap rake.
- E200 or of DYLEM company’s control system.
- Storage capacity up to 500 programs, 20 steps in every program.
- Stop potitioning accuracy of 0.1 mm with setting compensation.
- Cutters kit.
- Operator’s fingers protection at machine front.
- Cutting line lighting.
- Hydraulic pressure of cut metal plates.
- Cutters for stainless steel cutting.
- Metal plate ball guiding on table.
- 3 front slides.
- Feed value potentiometer.
- Front stop with angular measure.
- Side safety guards.
- Rear safety guard.
- Foot switch.
- TOD in Polish language.
- EC Declaration.
|Material thickness (mm)||4||6||6||8||10||12||16||20|
|Working width (mm)||2000||2500||3200||3200||4000||4000||6000||5000|
|Cutting angle (°)||0,5-2||0,5-1,3||0,5-1,3||0,5-1,3||0,5-2,3||0,5-2,3||0,5-3||0,5-3|
|Number of impacts per minute||14||14||12||12||6||5||5||4|
|Motor power (kW)||5,5||7,5||7,5||7,5||15||15||37||37|
|Rear stop range of operation (mm)||750||750||750||750||750||750||750||750|